RLK78-50JFLA-BAA
7/8" RADIAFLEX® RLK Cable, A-series, BAA Compliant
Rev : A | Rev date : 14 May 2021
- BAA Compliant. RFS Technologies is proud to announce that the product of RLK78-50JFLA-BAA manufactured by RFS Technologies Meriden Factory in CT, U.S. is BAA compliant with Federal Transit Administration's requirements.
- RADIAFLEX® functions as a distributed antenna to provide communications in tunnels, mines and large building complexes and is the solution for any application in confined areas.
- Slots in the copper outer conductor allow a controlled portion of the internal RF energy to be radiated into the surrounding environment. Conversely, a signal transmitted near the cable will couple into the slots and be carried along the cable length.
- RADIAFLEX® is used for both one-way and two-way communication systems and because of its broadband capability, a single radiating cable can handle multiple communication systems simultaneously.
- This RADIAFLEX® radiating cable utilize a low-loss cellular polyethylene foam dielectric and a smooth copper outer conductor which offers a superior electrical performance together with good bending properties.
FEATURES / BENEFITS
-
BAA Compliant
- Broadband from 30 MHz to 980 MHz
- For applications in tunnels and buildings
- Low coupling loss variations
RLK cable, A-series
General Specifications |
|---|
| Size | | 7/8 |
|
Electrical Specifications |
|---|
| Max. Operating Frequency | MHz | 980 | | Cable Type | | RLK | | Impedance | Ohm | 50 +/- 2 | | Velocity, percent | % | 89 | | Capacitance | pF/m (pF/ft) | 75 (22.9) | | Inductance, uH/m (uH/ft) | µH/m (µH/ft) | 0.188 (0.057) | | DC-resistance inner conductor, ohm/km (ohm/1000ft) | Ω/km (Ω/1000ft) | 1.74 (0.53) | | DC-resistance outer conductor, ohm/km (ohm/1000ft) | Ω/km (Ω/1000ft) | 2.52 (0.77) | | Stop bands | MHz | 300-375, 650-685 | | Frequency Selection | MHz | 600, 900 |
|
Mechanical Specifications |
|---|
| Jacket | | JFL | | Jacket Description | | Halogen free, non corrosive, flame and fire retardant, low smoke, polyolefin + flame barrier tape above outer conductor for lowest cable loss | | Slot Design | | Groups of vertical slots at short intervals | | Inner Conductor Material | | Copper Tube | | Outer Conductor Material | | Overlapping Copper Strip | | Diameter Inner Conductor | mm (in) | 9.3 (0.37) | | Diameter Outer Conductor | mm (in) | 23.8 (0.94) | | Diameter over Jacket Nominal | mm (in) | 28.5 (1.12) | | Minimum Bending Radius, Single Bend | mm (in) | 350 (13.8) | | Cable Weight | kg/m (lb/ft) | 0.55 (0.37) | | Tensile Force | N (lb) | 2300 (507) | | Indication of Slot Alignment | | Bulge atop slots | | Recommended / Maximum Clamp Spacing | m (ft) | 0.9 (3) | | Minimum Distance to Wall | mm (in) | 80 (3.15) |
|
Testing and Environmental |
|---|
| Jacket Testing Methods | | Test methods for fire behaviour of cable :
IEC 60754-1/-2 smoke emission: halogen free, non corrosive
IEC 61034 low smoke
IEC 60332-1 flame retardant
IEC 60332-3-24 fire retardant
UL1666, ASTM E 662, NES711 and NES713
NFPA130 (ed. 2014) Ch.12 (NFPA70 ) via UL-1685/FT4/IEEE1202 |
|
Temperature Specifications |
|---|
| Storage Temperature | °C(°F) | -70 to 85 (-94 to 185 ) | | Installation Temperature | °C(°F) | -25 to 60 (-13 to 140 ) | | Operation Temperature | °C(°F) | -40 to 85 (-40 to 185 ) |
|
Attenuation |
|---|
| Frequency, MHz | Longitudinal Loss, dB/100 m (dB/100 ft) | Coupling Loss 50%, dB | Coupling Loss 95%, dB |
| 75 |
1,08 (0,33) |
46 (50) |
58 (60) |
| 150 |
1,56 (0,48) |
54 (58) |
66 (69) |
| 380 |
2,69 (0,81) |
53 (55) |
57 (59) |
| 400 |
2,70 (0,82) |
53 (55) |
57 (59) |
| 450 |
2,90 (0,88) |
52 (55) |
56 (59) |
| 470 |
2,97 (0,91) |
52 (55) |
56 (59) |
| 500 |
3,10 (0,94) |
52 (55) |
56 (59) |
| 800 |
4,35 (1,33) |
55 (58) |
59 (62) |
| 870 |
4,90 (1,49) |
56 (59) |
61 (64) |
| 900 |
5,05 (1,54) |
57 (60) |
62 (65) |
| 960 |
5,19 (1,58) |
57 (60) |
62 (65) |
|
Notes
- BAA Compliant.
- Coupling loss as well as longitudinal attenuation of RADIAFLEX® cables are measured by the free space method according to IEC 61196-4.
- Coupling loss values are measured with a radial (below 330 MHz) or parallel (above 330 MHz) orientated dipole antenna.
- The coupling loss values given in brackets are average values of all three spatial orientations (radial, parallel and orthogonal) of dipole antenna.
- Coupling loss values are given with a tolerance of +10 dB and longitudinal loss values with a tolerance of +5%. Note: Measured values below nominal are better. They are not limited by any tolerance-range.
- In case of a conflict of operational and stop band, please contact RFS Technologies for further assistance.
- As with any radiating cable, the performance in building or tunnel environments may deviate from figures based on free space method.
